Iron-on hem tape is a kind of adhesive tape that’s used to create a fast and straightforward hem on a wide range of materials. It’s a nice choice for individuals who don’t have a stitching machine or who will not be snug stitching. Iron-on hem tape is accessible in a wide range of widths and colours, so it may be used on a wide range of tasks.
To make use of iron-on hem tape, you will want to first measure and reduce the tape to the specified size. Then, you will want to fold the hem of the material up by about 1/2 inch and press it with an iron. Subsequent, you will want to peel off the backing of the iron-on hem tape and place it on the folded hem, with the adhesive aspect down. Lastly, you will want to press the iron over the hem tape for about 10 seconds, or till the tape is bonded to the material.
Iron-on hem tape is a good way to create a fast and straightforward hem on a wide range of materials. It’s a nice choice for individuals who don’t have a stitching machine or who will not be snug stitching. Iron-on hem tape can also be a good way to restore a hem that has come undone.
1. Measure and reduce
Measuring and reducing the iron-on hem tape to the specified size is an important step within the strategy of utilizing iron-on hem tape. This step ensures that the hem would be the right measurement and that the tape will adhere correctly to the material.
If the iron-on hem tape isn’t reduce to the proper size, it will probably trigger the hem to be too lengthy or too brief. This could make the garment look unprofessional and may make it tough to put on. As well as, if the iron-on hem tape isn’t reduce to the proper size, it could not adhere correctly to the material. This could trigger the hem to come back undone, which may be irritating and time-consuming to repair.
To measure and reduce the iron-on hem tape to the specified size, you will want to first measure the size of the hem. Upon getting the measurement, you will want so as to add 1/2 inch to the measurement. This provides you with the size of the iron-on hem tape that you might want to reduce.
Upon getting the measurement, you may reduce the iron-on hem tape to the specified size utilizing a pointy pair of scissors. You’ll want to reduce the tape straight, as it will assist to make sure that the hem will likely be even.
Measuring and reducing the iron-on hem tape to the specified size is an easy however essential step within the strategy of utilizing iron-on hem tape. By following these steps, you may make sure that your hem would be the right measurement and that the tape will adhere correctly to the material.
2. Fold and press
Folding and urgent the hem of the material is an important step within the strategy of utilizing iron-on hem tape. This step helps to create a clean, even floor for the tape to stick to, which ensures a robust and lasting bond. Moreover, folding and urgent the hem helps to forestall the material from fraying, which might make the hem look unprofessional and unfinished.
To fold and press the hem, begin by folding the uncooked fringe of the material up by about 1/2 inch. Then, use a heat iron to press the fold alongside the whole size of the hem. You’ll want to press firmly and evenly to create a pointy crease. As soon as the hem is pressed, it is able to apply the iron-on hem tape.
Failure to correctly fold and press the hem can lead to various issues. For instance, if the hem isn’t folded evenly, the iron-on hem tape might not adhere correctly, which might trigger the hem to come back undone. Moreover, if the hem isn’t pressed firmly sufficient, the crease is probably not sharp, which might make the hem look sloppy and unfinished.
By following the steps above, you may make sure that the hem of your material is correctly folded and pressed, which can assist to create a robust and lasting bond with the iron-on hem tape.
3. Peel and place
Within the context of utilizing iron-on hem tape, the step “Peel and place” is essential because it entails the appliance of the hem tape to the folded hem of the material. This step ensures a robust and lasting bond between the hem and the tape, leading to a neat and professional-looking end.
- Exact Placement: Correct placement of the iron-on hem tape is important to realize a straight and even hem. Cautious alignment of the tape alongside the folded edge ensures that the hem is uniform and free from puckering or gathers.
- Adhesive Activation: The adhesive backing of the iron-on hem tape is activated by warmth, which is utilized by ironing. When the tape is positioned on the folded hem and warmth is utilized, the adhesive melts and bonds with the material fibers, creating a robust and sturdy maintain.
- Everlasting Bonding: As soon as the iron-on hem tape is bonded to the material, it varieties a everlasting attachment. This eliminates the necessity for stitching or different strategies of hemming, offering a handy and long-lasting answer.
- Invisible End: Correctly utilized iron-on hem tape creates an invisible end, because the tape is hid inside the folded hem. This leads to a clear and professional-looking hem that maintains the integrity of the material’s design.
In abstract, the “Peel and place” step in utilizing iron-on hem tape is a crucial side of the method. It entails exact placement, adhesive activation, everlasting bonding, and an invisible end, all of which contribute to a profitable and aesthetically pleasing hem.
4. Iron and bond
The step “Iron and bond” in “How To Use Iron On Hem Tape” is essential for creating a robust and lasting bond between the hem tape and the material. This step entails making use of warmth and strain to activate the adhesive on the hem tape, which then melts and adheres to the material fibers.
- Adhesive Activation: The warmth from the iron prompts the adhesive on the hem tape, inflicting it to soften and grow to be sticky. This permits the tape to stick to the material fibers, creating a robust bond.
- Bonding Time: Making use of strain with the iron for about 10 seconds ensures that the adhesive has enough time to bond with the material. This prevents the hem from peeling off or coming undone.
- Everlasting Attachment: As soon as the adhesive has bonded with the material, it creates a everlasting attachment. This eliminates the necessity for stitching or different strategies of hemming, offering a handy and long-lasting answer.
- Invisible End: Correctly utilized iron-on hem tape creates an invisible end, because the tape is hid inside the folded hem. This leads to a clear and professional-looking hem that maintains the integrity of the material’s design.
In abstract, the “Iron and bond” step in “How To Use Iron On Hem Tape” is important for reaching a robust, everlasting, and invisible hem. By following the directions rigorously and making use of the correct quantity of warmth and strain, you may make sure that your hem will final for years to come back.
FAQs on “How To Use Iron On Hem Tape”
This part gives solutions to regularly requested questions on utilizing iron-on hem tape, addressing widespread considerations or misconceptions to boost the understanding and profitable software of this system.
Query 1: What sorts of materials can I exploit iron-on hem tape on?
Iron-on hem tape can be utilized on a variety of materials, together with cotton, polyester, nylon, and blends. Nonetheless, it’s not advisable to be used on delicate materials resembling silk or lace, as the warmth from the iron can harm these supplies.
Query 2: How do I put together the material earlier than making use of the iron-on hem tape?
Earlier than making use of the iron-on hem tape, the material needs to be clear and freed from any grime or particles. Additionally it is essential to guarantee that the material is dry, as moisture can stop the tape from adhering correctly.
Query 3: How lengthy ought to I press the iron on the hem tape?
The size of time you might want to press the iron on the hem tape will differ relying on the kind of material you might be utilizing. For many materials, making use of agency strain for about 10 seconds is enough to create a robust bond.
Query 4: Can I exploit iron-on hem tape to restore a torn hem?
Sure, iron-on hem tape can be utilized to restore a torn hem. Merely overlap the torn edges of the hem and apply the iron-on hem tape over the overlap. Press the iron firmly for about 10 seconds, and the torn hem will likely be repaired.
Query 5: How do I take away iron-on hem tape if I make a mistake?
When you make a mistake when making use of iron-on hem tape, you may take away it by heating it up once more with an iron after which peeling it off. Watch out to not overheat the material, as this will harm it.
Query 6: What are some suggestions for utilizing iron-on hem tape?
Listed here are a couple of suggestions for utilizing iron-on hem tape:
. Use a ruler or measuring tape to make sure that the hem is even.
. Fold the hem up twice to create a extra sturdy bond.
. Apply the iron-on hem tape to the mistaken aspect of the material.
. Press the iron firmly and evenly over the hem tape.
. Enable the hem tape to chill utterly earlier than dealing with the material.
By following the following pointers, you may obtain professional-looking outcomes when utilizing iron-on hem tape.
Abstract: Iron-on hem tape is a flexible and handy device for creating fast and straightforward hems on a wide range of materials. By understanding learn how to use iron-on hem tape correctly, you may obtain nice outcomes and save effort and time in your stitching tasks.
Transition to the following article part: Now that you understand how to make use of iron-on hem tape, you may discover different strategies for hemming materials, resembling stitching a blind hem or utilizing a serger.
Iron-On Hem Tape Suggestions
“”
Tip 1:
Tip 2:
Tip 3:
Tip 4:
Tip 5:
Tip 6:
Tip 7:
Tip 8:
Conclusion
Iron-on hem tape is a flexible and handy device that can be utilized to create fast and straightforward hems on a wide range of materials. It’s a nice choice for individuals who don’t have a stitching machine or who will not be snug stitching. Iron-on hem tape can also be a good way to restore a torn hem.
To make use of iron-on hem tape, merely measure and reduce the tape to the specified size, fold the hem of the material up by about 1/2 inch, peel off the backing of the iron-on hem tape, and place it on the folded hem. Then, press the iron over the hem tape for about 10 seconds, or till the tape is bonded to the material. By following these easy steps, you may obtain professional-looking outcomes with iron-on hem tape.
Iron-on hem tape is a invaluable device for any residence sewer. It’s a fast, simple, and inexpensive option to hem a wide range of materials. With a bit follow, you may obtain nice outcomes with iron-on hem tape.
